2x 20m PD Connex DMX Cable Set for Lighting Systems
Supplied as two matching 20m PD Connex CX100-20 cables, this set is made for 3-pin DMX data links between lighting controllers and compatible fixtures in indoor stage and venue systems.
Technical Specifications
| Cable type | DMX lighting-control cable |
| Characteristic impedance | 120 ohm |
| Cable length | 20m |
| Colour | Black |
| IP Rating | N/A |
| Connector A | 3-pin XLR male |
| Connector B | 3-pin XLR female |
| Conductor size | 28×0.1mm |
| Shielding | 60×0.1mm |
| Outer jacket material | PVC |
| Cable outer diameter | 6mm |
| Connector material | Metal |
| Cable flexibility | Flexible |
| Suitable for | DMX controllers, lighting fixtures, splitters, interfaces and terminators |
| Use environment | Indoor stage, Venue, Installation |
| Warranty | 2 years |
Ideal For
- DMX controller outputs to first fixtures in a lighting run
- Indoor stages where longer cable paths are required
- Fixed lighting installations in venues, clubs and theatres
- Connecting compatible effect lighting, wash lights and LED fixtures
- AV and lighting technicians building tidy DMX signal routes
Compatibility & Useful Information
This DMX lighting cable pack is intended for equipment using 3-pin XLR DMX control connections. Each supplied DMX wire has a male connector at one end and a female connector at the other, matching common DMX XLR fixture linking layouts. As each lead is 20m, it is a practical long DMX cable choice for crossing stages or reaching installed lighting positions. Confirm that your controller and fixtures use 3-pin DMX before purchase.
Reviews
There are no reviews yet.