PD Connex CX100-20 3x 20m DMX Cable Pack
This three-cable pack provides 20m DMX lighting-control leads with 3-pin XLR male-to-female connections, designed for linking lighting desks, DMX fixtures, splitters, interfaces and terminators in indoor setups.
Technical Specifications
| Cable type | DMX lighting-control cable |
| Characteristic impedance | 120 ohm |
| Cable length | 20m |
| Colour | Black |
| IP Rating | N/A |
| Connector A | 3-pin XLR male |
| Connector B | 3-pin XLR female |
| Conductor size | 28×0.1mm |
| Shielding | 60×0.1mm |
| Outer jacket material | PVC |
| Cable outer diameter | 6mm |
| Connector material | Metal |
| Cable flexibility | Flexible |
| Suitable for | DMX controllers, lighting fixtures, splitters, interfaces and terminators |
| Use environment | Indoor stage, Venue, Installation |
| Warranty | 2 years |
Ideal For
- Long-distance links from controller positions to lighting fixtures
- Fixture-to-fixture DMX runs across stages and medium venues
- Permanent indoor lighting installations using 3-pin DMX devices
- Theatre, venue, nightclub and AV installer lighting systems
- Mobile DJ and event production rigs requiring spare matching leads
Compatibility & Useful Information
This pack is intended for DMX lighting systems using 3-pin XLR connections. Each DMX lighting cable has a male connector at one end and a female connector at the other, matching many DMX XLR controllers and fixtures. Use it where a 120 ohm DMX wire is required for compatible lighting-control equipment. As a 20m long DMX cable, it is suited to wider stage layouts, venue installations and runs between control points and fixtures. Check that your equipment uses 3-pin DMX rather than 5-pin DMX before ordering.
Reviews
There are no reviews yet.