4x PD Connex CX06-10 10m DMX Cable Combi Leads for Lighting Fixtures
Supplied as a set of four matching 10m cables, this PD Connex CX06-10 combi lead is made for linking suitable lighting fixtures with both power and DMX signal in a single cable run.
Technical Specifications
| Cable type | DMX lighting-control combi cable |
| Characteristic impedance | 120 ohm (DMX cable) |
| Cable length | 10m |
| Colour | Black |
| IP Rating | N/A |
| Connector A | Powerconnector and 3-pin XLR male |
| Connector B | Powerconnector and 3-pin XLR female |
| Conductor size | 3x 1.5mm power cable; signal conductor 8×0.2mm (DMX cable) |
| Shielding | 64×0.08mm (DMX cable) |
| Outer jacket material | PVC/PTFE braid |
| Cable outer diameter | 10.8mm |
| Connector material | Metal, plastic |
| Cable flexibility | Flexible |
| Suitable for | DMX controllers, lighting fixtures, moving heads, LED effects, wall washers and DMX daisy-chaining |
| Use environment | Indoor stage, Venue |
| Warranty | 2 years |
Ideal For
- Running neat cable paths between compatible lighting fixtures
- Stage lighting systems using 3-pin DMX daisy-chaining
- LED PAR cans, LED effects and moving heads with matching sockets
- Venue, theatre and nightclub lighting installations indoors
- Event production setups needing multiple identical 10m combi leads
Compatibility and Useful Information
This is a dedicated DMX cable for lighting with a combined power section, so check that your fixtures use Powerconnector A/B and 3-pin XLR connections before ordering. The 3 pin DMX cable section has a 120 ohm characteristic impedance for DMX control data, while the power section uses 3x 1.5mm conductors. For rigs that support this connector layout, one DMX and power cable can replace separate power and data leads between fixtures. It suits buyers searching for a DMX power cable or Powercon DMX cable for indoor stage, venue and event lighting use.
Reviews
There are no reviews yet.