PD Connex CX100-0.7 3-Pin DMX cable Male to Female
Made for short DMX signal runs, the PD Connex CX100-0.7 connects compatible 3-pin XLR lighting equipment in indoor stage and venue systems without leaving excess cable around the rig.
Technical Specifications
| Cable type | DMX lighting-control cable |
| Characteristic impedance | 120 ohm |
| Cable length | 0.75m |
| Colour | Black |
| IP Rating | N/A |
| Connector A | 3-pin XLR male |
| Connector B | 3-pin XLR female |
| Conductor size | 28×0.1mm |
| Shielding | 60×0.1mm |
| Outer jacket material | Flexible PVC |
| Cable outer diameter | 6mm |
| Connector material | Metal |
| Cable flexibility | Flexible |
| Suitable for | DMX controllers, lighting fixtures, splitters, interfaces and terminators |
| Use environment | Indoor stage, Venue |
| Warranty | 2 years |
Ideal For
- Compact lighting rigs where long leads create clutter
- Moving heads, wash lights and effect lighting fixtures
- Indoor stage setups used by DJs and lighting technicians
- Permanent venue lighting links between nearby units
- Fixture chains using compatible 3-pin DMX connections
Compatibility & Useful Information
This DMX lighting cable is for lighting-control data, not for choosing a lead by connector shape alone. It uses 3-pin XLR male and female connectors, so it suits compatible controllers, fixtures and accessories using the 3 pin DMX format. The 0.75m length is especially useful when fixtures sit close together, such as on a T-bar, truss or small stage wash. If your equipment specifies DMX XLR and needs XLR for DMX, this dedicated DMX wire gives you the correct short-format connection for indoor use.
Reviews
There are no reviews yet.