PD Connex CX09-5 Combi dmx cable
Built for indoor lighting systems, this 5m PD Connex combi cable links IEC power and 3-pin DMX control between compatible fixtures, controllers and interfaces.
Key Features
Technical Specifications
| Cable type | DMX lighting-control combi cable |
| Characteristic impedance | 120ohm (DMX Cable) |
| Cable length | 5m |
| Colour | Black |
| IP Rating | N/A |
| Connector A | 3-pin XLR male/IEC male |
| Connector B | 3-pin XLR female/IEC female |
| Conductor size | 8×0.2mm (DMX cable) |
| Shielding | 64×0.08mm (DMX cable) |
| Outer jacket material | PVC/PTFE braid |
| Cable outer diameter | 10.8mm |
| Connector material | Metal/Plastic |
| Cable flexibility | Standard |
| Suitable for | DMX controllers, lighting fixtures, splitters and interfaces |
| Use environment | Indoor stage |
| Warranty | 2 years |
Ideal For
- Indoor DMX lighting rigs where neat cabling matters
- Mobile entertainers wiring several effects from fixture to fixture
- Lighting hire kits needing repeatable connection layouts
- Bars, clubs and venues using controller-led light shows
- Theatre and school stages with compatible IEC lighting fixtures
Compatibility & Useful Information
The CX09-5 is a 3 pin dmx cable and IEC power combi lead, so it suits equipment that has matching 3-pin DMX and IEC connections. The male-to-female configuration helps with daisy chaining, keeping signal and power paths together across compatible fixtures. As a dmx power cable, it can reduce the number of separate leads needed during setup and pack-down, which is useful on temporary stages and hire jobs. Customers looking for a dmx and power cable should note the connector type carefully: this is IEC-based, not a powercon dmx cable. For compatible fixtures, it remains a tidy dmx cable for lighting control, supporting programmed scenes, dimming, colour changes, movement and effects from the control system.
Reviews
There are no reviews yet.