Twin Pack 2m DMX Cable Combi Leads for Lighting Fixtures
The PD Connex CX06-2 pack supplies two matching 2m combi leads, allowing power and DMX control data to be carried between compatible fixtures through Power Connector and 3-pin XLR connections.
Technical Specifications
| Cable type | DMX lighting-control combi cable |
| Characteristic impedance | 120 ohm (DMX cable) |
| Cable length | 2m |
| Colour | Black |
| IP Rating | N/A |
| Connector A | Power Connector + 3-pin XLR female |
| Connector B | Power Connector + 3-pin XLR male |
| Conductor size | 8×0.2mm (DMX cable) |
| Shielding | 64×0.08mm braided shielding (DMX cable) |
| Outer jacket material | PVC/PTFE braid |
| Cable outer diameter | 10.8mm |
| Connector material | Metal, Plastic |
| Cable flexibility | Flexible |
| Suitable for | DMX controllers, lighting fixtures, splitters and interfaces |
| Use environment | Indoor stage, Touring, Venue |
| Warranty | 2 years |
Ideal For
- Short fixture-to-fixture links on indoor stages
- DMX-controlled LED effects and moving heads
- Venue lighting rigs with compatible power connections
- Wall washer installations requiring tidy signal and power runs
- Mobile DJ, theatre and AV hire lighting systems
Compatibility & Useful Information
This is a DMX and power cable for lighting equipment fitted with Power Connector A/B and 3-pin XLR DMX ports. The 3-pin DMX cable section is specified at 120 ohm with braided shielding, so it is intended for DMX lighting-control use rather than general audio patching. Before ordering this PowerCon DMX cable style lead, check the connector genders on your fixtures, controller, splitter or interface. It is a suitable DMX cable for lighting where a 2m indoor combi link is required.
Reviews
There are no reviews yet.