4x 2m Combi DMX Cable for Lighting Fixtures
Supplied as a set of four, these PD Connex CX06-2 combi cables let compatible lighting units pass both power and DMX control through a single 2m cable between fixtures.
Technical Specifications
| Cable type | DMX lighting-control combi cable |
| Characteristic impedance | 120 ohm (DMX cable) |
| Cable length | 2m |
| Colour | Black |
| IP Rating | N/A |
| Connector A | Power Connector + 3-pin XLR female |
| Connector B | Power Connector + 3-pin XLR male |
| Conductor size | 8×0.2mm (DMX cable) |
| Shielding | 64×0.08mm braided shielding (DMX cable) |
| Outer jacket material | PVC/PTFE braid |
| Cable outer diameter | 10.8mm |
| Connector material | Metal, Plastic |
| Cable flexibility | Flexible |
| Suitable for | DMX controllers, lighting fixtures, splitters and interfaces |
| Use environment | Indoor stage, Touring, Venue |
| Warranty | 2 years |
Ideal For
- Short links between compatible DMX-controlled lighting fixtures
- Moving head, LED effect and wall washer daisy-chain layouts
- Stage lighting systems where power and control follow the same route
- Theatre, nightclub, venue and AV installation lighting rigs
- Lighting rental stock for repeatable 2m fixture-to-fixture connections
Compatibility & Useful Information
This is a DMX cable for lighting with a 120 ohm DMX section, not a general audio XLR lead. It suits equipment using 3-pin DMX plus compatible Powerconnector A/B power connections, so confirm both ends before ordering. The combined format makes each lead a useful DMX and power cable, while the connector layout also matches many buyers’ search for a powercon dmx cable. For 3-pin lighting setups, this 3-pin DMX cable and DMX power cable pack provides four identical 2m runs.
Reviews
There are no reviews yet.