3 Pack PD Connex CX100-6 DMX Cable Leads with 6-Metre Length
A set of three black 6m PD Connex CX100-6 DMX cables for lighting-control connections. Each lead runs from 3-pin XLR male to 3-pin XLR female, making it suitable for DMX controllers, fixtures, splitters and interfaces.
Technical Specifications
| Cable type | DMX lighting-control cable |
| Characteristic impedance | 120 ohm |
| Cable length | 6m |
| Colour | Black |
| IP Rating | N/A |
| Connector A | 3-pin XLR male |
| Connector B | 3-pin XLR female |
| Conductor size | 28×0.1mm |
| Shielding | 60×0.1mm |
| Outer jacket material | Flexible PVC |
| Cable outer diameter | 6mm |
| Connector material | Metal |
| Cable flexibility | Flexible |
| Suitable for | DMX controllers, lighting fixtures, splitters, interfaces and terminators |
| Use environment | Indoor stage, Venue |
| Warranty | 2 years |
Ideal For
- Fixture-to-fixture DMX links across medium stage areas
- Lighting desks connected to compatible DMX fixtures
- Mobile DJ lighting rigs with several matching cable runs
- Theatre and venue lighting setups using 3-pin XLR DMX
- Connections involving DMX splitters, interfaces and terminators
Compatibility & Useful Information
This three-cable set is intended for equipment that specifically uses 3-pin DMX over XLR-style connectors. Each DMX lighting cable has a 3-pin male connector at one end and a 3-pin female connector at the other, so it can sit in a standard DMX signal path between compatible units. If you are selecting a DMX wire for lighting data rather than audio, the 120 ohm rating and shielding make this DMX XLR lead suitable for the listed DMX controllers, fixtures, splitters, interfaces and terminators. Check that your equipment requires XLR for DMX in a 3 pin DMX format before ordering.
Reviews
There are no reviews yet.