4x PD Connex DMX Cable Pack with 1.5 Metre Length
Supplied as four matching 1.5m leads, this PD Connex CX100-1 set provides 3-pin male-to-female XLR connections for DMX lighting-control equipment in compact indoor rigs, stages and fixed venue systems.
Technical Specifications
| Cable type | DMX lighting-control cable |
| Characteristic impedance | 120 ohm |
| Cable length | 1.5m |
| Colour | Black |
| IP Rating | N/A |
| Connector A | 3-pin XLR male |
| Connector B | 3-pin XLR female |
| Conductor size | 28×0.1mm |
| Shielding | 60×0.1mm |
| Outer jacket material | Flexible PVC |
| Cable outer diameter | 6mm |
| Connector material | Metal |
| Cable flexibility | Flexible |
| Suitable for | DMX controllers, lighting fixtures, splitters, interfaces and terminators |
| Use environment | Indoor stage, Venue |
| Warranty | 2 years |
Ideal For
- Fixture-to-fixture links where units are mounted close together
- DMX controllers connected to 3-pin lighting fixtures
- Moving heads, LED PAR cans, wash lights and effects
- Indoor stage, venue and permanent lighting installations
- Spare or replacement leads for hire and production stock
Compatibility & Useful Information
This pack is suitable where a DMX lighting cable with 3-pin XLR male and female connectors is required. It is a DMX wire for lighting-control signal connections, with a 120 ohm impedance stated for DMX use. Check that your controller, fixture, splitter, interface or terminator uses DMX XLR 3-pin connections before ordering. If you need XLR for DMX patching over short distances, this 3 pin DMX four-pack is well suited to compact rigs and nearby fixture runs.
Reviews
There are no reviews yet.