PD Connex CX100-3 3m DMX Cable Set with 4 Leads
A four-cable pack of 3m PD Connex CX100-3 DMX leads for linking lighting controllers, fixtures and related DMX hardware through 3-pin XLR male-to-female connections.
Technical Specifications
| Cable type | DMX lighting-control cable |
| Characteristic impedance | 120 ohm |
| Cable length | 3m |
| Colour | Black |
| IP Rating | N/A |
| Connector A | 3-pin XLR male |
| Connector B | 3-pin XLR female |
| Conductor size | 28×0.1mm |
| Shielding | 60×0.1mm |
| Outer jacket material | Flexible PVC |
| Cable outer diameter | 6mm |
| Connector material | Metal |
| Cable flexibility | Flexible |
| Suitable for | DMX controllers, lighting fixtures, splitters, interfaces and terminators |
| Use environment | Indoor stage, Venue |
| Warranty | 2 years |
Ideal For
- Building 3-pin DMX daisy chains between fixtures.
- Mobile DJ lighting rigs and event production setups.
- Indoor stage and venue lighting installations.
- Connecting controllers to splitters, interfaces or fixtures.
- General 3m patching between compatible DMX devices.
Compatibility & Useful Information
This set is intended for lighting-control equipment that uses 3-pin XLR DMX connections. Each DMX lighting cable has a male connector on one end and a female connector on the other, making it suitable for typical fixture linking and controller outputs where 3-pin sockets are used. If you need a proper DMX wire rather than an audio-style XLR lead, the 120 ohm specification and shielding make this a suitable choice. Confirm your equipment requires 3-pin DMX rather than 5-pin as these are 3-pin DMX XLR leads. For users searching for XLR for DMX, this pack provides four matching 3m cables.
Reviews
There are no reviews yet.