4x PD Connex CX104-3 DMX Cable Set – 3m
Supplied as a four-cable set, the PD Connex CX104-3 is a 3m DMX lighting cable for lighting-control signal runs between compatible controllers, fixtures, splitters, and interfaces.
Technical Specifications
| Cable type | DMX lighting-control cable |
| Characteristic impedance | 120ohm |
| Cable length | 3m |
| Colour | Black |
| IP Rating | IP65 |
| Connector A | 3-pin XLR male |
| Connector B | 3-pin XLR female |
| Conductor size | 28×0.1mm |
| Shielding | 60×0.1mm |
| Outer jacket material | PVC |
| Cable outer diameter | 6mm |
| Connector material | Metal |
| Cable flexibility | Flexible |
| Suitable for | DMX controllers, lighting fixtures, splitters, interfaces and terminators |
| Use environment | Outdoor |
| Warranty | 2 years |
Ideal For
- Temporary outdoor event lighting and production rigs
- Indoor venue lighting where 3-pin DMX cabling is used
- General 3m links between nearby lighting fixtures
- AV installers working with outdoor DMX fixture networks
- DMX controller, splitter, interface and terminator connections
Compatibility & Useful Information
This outdoor DMX cable pack is intended for DMX lighting-control systems with 3-pin XLR connectors. It is not a 5-pin DMX lead, so check the connector type on your controller and fixtures before ordering. Each outdoor rated DMX cable has a 3m length, well suited to short and medium fixture links where IP65-rated connectors are useful for outdoor environments.
Reviews
There are no reviews yet.